Reflow oven R350 small reflow oven small wave soldering

Reflew oven TN380CHeating system: TN380C adopts high effective and energy-savingNickel-chromium heating tube. Advanced technology and Long life. AndTORCH self-developed hot-air circling system features warm up quickly, whichCan make PCB component be heated evenly.Protection system: TN380C uses SSR solid relay (450V&rp

Featured Products

Reflew oven TN380C
Heating system: TN380C adopts high effective and energy-saving
Nickel-chromium heating tube. Advanced technology and Long life. And
TORCH self-developed hot-air circling system features warm up quickly, which
Can make PCB component be heated evenly.
Protection system: TN380C uses SSR solid relay (450V) that has large
Power and pressure prevention to non-contact output, safe and reliable. It can
Monitor the change of temperature and heat number in furnace chamber with the
Functions fuzzy control and data collection. Then control the heating component
With the least pulse and response quickly. TO keeps the Temperature control
Accuracy, but the equipment can not be damage for the high current and high
Voltage. And each room fits a safety pipe which is high temperature and high
Pressure resistant function so that the whole system can run safely and calmly.
Accuracy control by IPC and PID intelligent arithmetic. According to the PID intelligent calculation, heat output can be controlled accurately and response
To the change of outside to balance the temperature. The whole system has a
Modularized design. It is convenient to maintenance and disassembles
Outer shell and furnace body of TN380C can be opened wholly and automatically. It is convenient to clean and maintain it.

[Main features for TN380C]:
1> Intuitional welding control: TN380C adopts advanced furnace
Temperature collection system. It can test temperature curve and temperature in
Furnace hearth. The temperature curve can be recorded or printed at the same
2> Smooth and safe transmission system: Drive system adopts a high
Quality conversion motor and conversion system. It also has a closed-loop
Governor and Turbine speed reducing box of 1: 100 to keep running
Smoothly. Speed: 01600mm/min.
3> Stable and safe electric control system: Delay switch protection. After
Power off, temperature drops evenly so that can prevent damage to transmission
Component and heater.
4> Power-off protection: To keep PCB output normal. Windows operating
Platform has a strong functions and high stability.
5> Upper and lower heating zones are separately controlled. The circulation speed can also adjust separately. It is suitable for welding different
PCB plates and components.
Model TN380C
Heating part parameter
Heating zone 8 heating zones(8 upper, 8cover)+1
Cooling zone
Heating method Full forced Hot air heating
Warm-up time 25min
Cooling zone 1 zone, (1up/1 below)
Cooling method transverse flow vortex centrifuge
Built-in automatic relay heating
To prevent over-pressure damage
Controller or motor when start up and to
Prevent component damage when
Transmission parameter
PCB Board width ≤ 300mm
PCB conveyor Height 900± 20mm
Conveyor direction L----R or R--L
Conveyor Material Stainless steel
Chain-driven Mesh belt conveyor Net belt and chain-driven transmission
Mesh belt width 300mm
Conveyor speed 0-1600mm/min adjustable
Control part parameter
Power supply 380V (3 pH, 4 wires) 50/60Hz
Max Power 42KW Normal working power 23KW
Warm-up time ≤ 30min
Control system PLC+ Torch module temp control
System+ IPC
Range of temperature control Room Temperature-360 degree
Temperature control Advanced Intelligent micro computer
PID temperature control automatically
In each zone + SSR non-contact output
Precision of temperature control ± 2 degree
Temperature distributing error ± 2 degree
Machine Body Parameter
Net Weight 860kg

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours